HENDERSON PREMIER RANGE

MADE BETWEEN 1992 AND 2003 CAN BE IDENTIFIED BY THE REINFORCING RIBS ON THE BACK.

 THERE WILL BE 2 RUNNING ACROSS OR UP AND DOWN

Shaft dia 12.7mm - wheel dia. approx. 33mm
overall length 84mm supplied with four cir-clips
as Henderson part No: 032017

THE CABLES CAN BE REPLACED WITHOUT CHANGING THE CONES

FITTED TO ALL DOOR SINGLE AND DOUBLE BEFORE 1992

SINGLE DOOR HAVE BRACES ON THE BACK IN THE SHAPE OF AN A

 The cones have to be changed with the wires and they fit all door made before 1992 both single and double

ALL THE ROLLERS BELOW WERE USED WITH THESE CONES

SIDE ROLLERS PRE 1981

Roller spindles to suit pre 1981
vertically tracked canopy doors up to 8 feet wide
shaft dia 12.6mm - wheel dia. 22.5mm
overall length 117mm

NOTE FIX BY NUTS ON THE END OF THE SHAFT

SIDE ROLLERS 1981 TO 1992

Roller spindles to suit vertically tracked
canopy doors from 1981-1992 up to 8' wide
shaft dia 12.7mm - wheel dia. 22.5mm fit with a cir-clip not a nut
overall length 123mm supplied with four cir-clips

 The Henderson part Number for this is 032009

SIDE ROLLERS FOR 14 Ft WIDE DOOR

For double canopy doors
shaft dia 15.9mm - wheel dia. 22.5mm
overall length 117mm
supplied with two nuts & two washers
same as Henderson part No: 039095

NOTE ! THEY LOOK THE SAME AS THE SINGLE VERSION BUT THEY HAVE A THICKER SHAFT