WARMSOLES ®
UNDERFLOOR HEATING SYSTEMS
Electric Underfloor Heating Mat
Suitable for any room in the house – including bathrooms and Wet Rooms!
WARMSOLES ® Underfloor heating mats are manufactured to the European standard IEC335/EN60335 which recommends that a heating mat with a rating of no more than 100W/m² should be installed onto a timber sub-floor.
Concrete floors absorb heat at a higher rate than timbers floors, therefore WARMSOLES ®Underfloor heating mats with higher output ratings – 150W/m² to 200W/m² are available to compensate for this. Well insulated constructions to the latest requirements of the building regulations need less powerful heating mats than those built to the requirements prevailing when the building was constructed.
WARMSOLES ® offers a LIFETIME Guarantee.
Timber Sub Floor:
When installing directly onto a timber sub floor, you can not put more than 100W/m². When this is exceeded, a minimum of the 3mm thermal insulation sheets MUST be installed first.
Choose you mat:
Choose the nearest size required for the area to be heated, buying one size lower (mats cannot be cut down).
|
Concrete Sub Floors - 160W/m² |
|
Concrete Sub Floors - 200W/m² |
|
Order Code |
Heated Area |
Heating Load |
Price (inc.vat) |
Order Code |
Heated Area |
Heating Load |
Price (inc.vat) |
|
WS4012 |
1.0 m² |
150 W |
£30.10 |
WS2555 |
0.35 m² |
70 W |
£28.49 |
|
WS2365 |
1.6 m² |
256 W |
£45.55 |
WS2520 |
0.65 m² |
130 W |
£34.40 |
|
WS4014 |
2.0 m² |
300 W |
£51.03 |
WS4024 |
1.0 m² |
200 W |
£40.85 |
|
WS2367 |
2.6 m² |
416W |
£58.45 |
WS4025 |
1.5 m² |
300 W |
£48.70 |
|
WS4016 |
3.0 m² |
450 W |
£69.88 |
WS4026 |
2.0 m² |
400 W |
£49.90 |
|
WS2380 |
3.4 m² |
544 W |
£76.67 |
WS4027 |
2.5 m² |
500 W |
£59.13 |
|
WS4017 |
4.0 m² |
600 W |
£86.23 |
WS4028 |
3.0 m² |
600 W |
£71.66 |
|
WS4018 |
5.0 m² |
750 W |
£125.00 |
WS4029 |
4.0 m² |
800W |
£82.78 |
|
WS4019 |
6.0 m² |
900 W |
£110.59 |
WS4030 |
5.0 m² |
1000 W |
£90.30 |
|
WS4020 |
7.0 m² |
1050 W |
£124.37 |
WS4031 |
6.0 m² |
1200 W |
£108.58 |
|
WS4021 |
8.0 m² |
1200 W |
£135.43 |
WS4032 |
7.0 m² |
1400W |
£123.63 |
|
WS4022 |
9.0 m² |
1350 W |
£145.13 |
WS4033 |
8.0 m² |
1600 W |
£148.35 |
|
WS4023 |
10.0 m² |
1500W |
£155.88 |
WS4034 |
9.0 m² |
1800 W |
£164.48 |
|
WS2436 |
11.0 m² |
1650 W |
£208.55 |
WS4035 |
10.0 m² |
2000 W |
£202.80 |
|
WS2731 |
12.0 m² |
1800 W |
£220.00 |
WS2745 |
11.0 m² |
2200 W |
£219.87 |
|
WS2381 |
13.3 m² |
2128 W |
£212.00 |
WS2747 |
12.0m |
2400 W |
£235.30 |
|
WS2554 |
16.25 m² |
2600 W |
£235.00 |
|
PLUS MORE SIZES IN BOTH WATTAGES |
To choose your mat, click on the link below and select the mat best suited for your area. Choose the mat one size below your total area. Mats can not be cut down:
150W/m²: http://stores.ebay.co.uk/Perfectheat_Underfloor-Heating_Underfloor-Heating-Mats_Concrete-Floor-160W-sq-m_W0QQcolZ4QQdirZ1QQfsubZ15039122QQftidZ2QQtZkm
200W/m²: http://stores.ebay.co.uk/Perfectheat_Underfloor-Heating_Underfloor-Heating-Mats_Concrete-Floor-200W-sq-m_W0QQcolZ4QQdirZ1QQfsubZ15039123QQftidZ2QQtZkm
Thermostats:
You will also need to order a thermostat to go with your mat. You can find these in our Ebay shop, or click on the following link:
http://stores.ebay.co.uk/Perfectheat_Underfloor-Heating_Thermostats_W0QQcolZ4QQdirZ1QQfsubZ8009489QQftidZ2QQtZkm
Insulation:
Current Building Regulations stipulate requirements for floor insulation but you can never provide too much insulation! Running costs of the heating system are determined by the room or dwelling’s heat loss so any expenditure on insulation will be repaid many times over. We recommend that you regard Building Regulation requirements as the ‘bare minimum’ and install additional insulation. We supply WARMSOLES ® Thermal Insulation Boards and WARMSOLES ® Insulated Tile Backer Boards available in sheet form with a K value (thermal conductivity) of 0.029W/m°K.
These are available from our Ebay shop.
Click on the link below:
http://stores.ebay.co.uk/Perfectheat_Underfloor-Heating_Insulation_W0QQcolZ4QQdirZ1QQfsubZ8009663QQftidZ2QQtZkm
Electrical Requirements:
The heating elements are simple to install by following the comprehensive installation instructions.
· The final electrical connections should be made by a qualified electrician in accordance with the current regulations.
· All installations require a 30mA RCD (residual current device) for safe operation.
· Thermostats are now permitted to be installed in a bathroom outside of Zone 2 under 17th Edition rules. Refer to section 701-753 of BS 7671:2008 for further details.
Unsure of what size you need?:
If you are unsure which mat you require, please contact us and we will tell you what the best size is for you.
Delivery charges:
FREE DELIVERY to all UK Mainland Destinations.
| 
) 
