Lighting a Dollshouse is safe, easy and quick!

The Streets Ahead Dolls house socket system requires no soldering and no electrical knowledge at all.It is a foolproof method for all dolls house enthusiasts of any age.

1.Plan which lights are going into each room.Remember that

 our transfomer (see our lighting category )will run up to 32

 bulbs not lights.

2. Socket Strip Method

You will need: 1x DE005 Transformer 

                        1x DE074 Socket strip

                        Lights of you choice     (All available in our lighting category) 

           3. Each light has a removable plug. Simply unwind the wire

from each prong on the plug and pull the wire through the plug.

4. Make a hole in the wall of the house and thread the

wire through.

5. Re-attach the wire to the plug by passing the wire through

 the plug and winding one wire around each prong to make

the connection.

6. Attach the  Socket Set (DE074) which has an adhesive back to

 the rear wall of the house.

7. Plug each light into the Socket Set—up to 12 lights.

8. The spade connectors on the DE074 Socket Set attaches to

the DE005 Transformer by unscrewing the two screws and

placing the connectors underneath. Then tighten the screws up and

the Transformer plugs straight into the wall.

                             It’s as easy as that!

It is advisable to wallpaper before lighting but carpet after lighting.